| 翻訳と辞書 |
| Interrupt request ： ウィキペディア英語版 |
Interrupt request (PC architecture)
In a computer, an interrupt request (or IRQ) is a hardware signal sent to the processor that temporarily stops a running program and allows a special program, an interrupt handler, to run instead. Hardware interrupts are used to handle events such as receiving data from a modem or network card, key presses, or mouse movements.
Interrupt lines are often identified by an index with the format of ''IRQ'' followed by a number. For example, on the Intel 8259 family of PICs there are eight interrupt inputs commonly referred to as ''IRQ0'' through ''IRQ7''. In x86 based computer systems that use two of these PICs, the combined set of lines are referred to as ''IRQ0'' through ''IRQ15''. Technically these lines are named ''IR0'' through ''IR7'', and the lines on the ISA bus to which they were historically attached are named ''IRQ0'' through ''IRQ15''
Newer x86 systems integrate an Advanced Programmable Interrupt Controller (APIC) that conforms to the Intel APIC Architecture. These APICs support a programming interface for up to 255 physical hardware IRQ lines per APIC, with a typical system implementing support for only around 24 total hardware lines.
== Overview ==
When working with personal computer hardware, installing and removing devices, the system relies on interrupt requests. There are default settings that are configured in the system BIOS and recognized by the operating system. These default settings can be altered by advanced users. Modern plug and play technology has not only reduced the need for concern for these settings, but has also virtually eliminated manual configuration.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Interrupt request (PC architecture)」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|